Rear Body Support for Awesomatix A800R/RR  MAX-09-026

Deflection of lightweight bodyshells, especially at higher speeds are a noticeable performance downgrade!
The solution is our MXLR Rear Body Support for the Awesomatix A800R/RR which:
- prevents deflection of the bodyshell under higher speeds
- reduces the risk of cracking the wheel arches of the bodyshell
The result is an extended lifetime of your bodyshells combined with better performance on the track as the shell will stay in its original shape and produce more downforce! 

Our MXLR Rear Body Support is made of high quality Material which is very durable and offers excellent impact resistance! In the design process we took special care about the A800R bulkhead design and the importance of "flex" in this area. Our Rear Body Support is designed to have the least flex influence possible! 

The Rear Body Support can be mounted in three different spots in the car, depending on the different toplink and toplink mounting options!
1: On the rear topdeck (facing in both directions possible)
2: In front of the AM19 toplink mounts (facing backwards)
3: In rear of the AM19 toplink mounts (facing forwards)
With the std. AM19-R toplink mounts you can choose which spot you prefer - all three will fit.
With the opt. AM19-TLT toplink mounts you may use the rear position and have the support facing forwards. 
With long toplinks mounted on the bulkheads you may use the front mounts of AM19. 
Pictures can be found in the gallery, showing all three mounting options. 

INFO: No mounting screws included! We recommend the use of Awesomatix Alloy Screws in 7mm length (SB3X7AL).

Installation info's: 
- Choose the correct mounting spot which fits with your toplink setup.
- Install the Rear Body Support.
- Set the Rear Body Support to the correct height! The top screw (not included) should touch the trunk without additional free play when the bodyshell itself is resting on the rear bodypost.

Sidenote: Don't forget, this product is made by a 3D printer. It means you are able to see layers and lines from the material! We strive for the best quality our printers are able to deliver. Still you need to keep in mind that 3D printed parts are not the same standard as machined or molded products.

MAX-09-026 contains:
1x Rear Body Support for Awesomatix A800R/RR


INFO: We may use additional parts, cars and/or items to display the use of our above described and named product. This additional parts, cars and/or items are NOT part of the above described and named product. The above described and named product consists only and exclusively the parts mentioned under "The product contains:"
You must read and follow the GENERAL & SAFETY PRECAUTIONS before use, which can be found here:  INSTRUCTIONS

MAX-09-026 (1) (small)

MAX-09-026 (6) (small)

MAX-09-026 (5) (small)

MAX-09-026 (4) (small)

MAX-09-026 (3) (small)

MAX-09-026 (2) (small)